Flushes out and cleans the oil circuits of motorcycles with four-stroke gasoline engines. The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used.

_oil_1576652832.jpg

LIQUI MOLY MOTORBIKE ENGINE FLUSH SHOOTER 80ML

Suitable for all hybrid vehicles with gasoline engine. To be added directly into the fuel tank. 250 ml is sufficient for up to 75 liters of fuel (dosage 1:300).

_oil_1583559088.jpg

LIQUI MOLY HYBRID ADDITIVE 250ML

Highly effective cleaning fluid for clearing the engine interior of troublesome deposits. Brings all types of oil-soluble and oil-insoluble residues into suspension and removes these from the oil circuit during the next oil change. Following this, the engine that has been cleared of deposits and contaminants and the fresh oil can then deliver its full performance. Wear in the engine is thus reduced and the service life is extended.For gasoline and diesel engines. Can be safely used in vehicles with toothed belt running in oil. 300&nbsp;ml sufficient for up to 6&nbsp;l of oil. Not suitable for use in motorcycles with wet clutches! Applic­a­tion300&nbsp;ml sufficient for up to 6 l of oil. Add to the motor oil at operating temperature before the oil change. Then allow engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with commercially available motor oils.

_oil_1557134713.jpg

LIQUI MOLY ENGINE FLUSH PLUS 300ML

Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents new deposits from forming. Eliminates starting problems and rough engine running. Maintains all components of the gasoline injection system. Protects the entire fuel system against corrosion. Improves throttle response and compression. Optimizes the emission test values and the performance of the engine. Clean engines use less fuel and reduce the pollutant emissions.For all gasoline engines, gasolines and operating conditions. Preventive or remedial. To be added directly into the fuel tank. 300&nbsp;ml sufficient for up to 70&nbsp;l of fuel. Effect remains for up to 2,000 km. Tested for turbochargers and catalytic converters. Applic­a­tion300 ml is sufficient for 70 l of fuel. Has a long-term effect of 2,000 km. Can be mixed with fuel at any time since mixing takes place automatically. Repeat treatment if problems reoccur.

_oil_1611139668.jpg

LIQUI MOLY INJECTION CLEANER 300ML

Fully synthetic high-performance motor oil. For maximum performance and outstanding engine protection under all operating conditions. Offers perfect lubrication, outstanding engine cleanliness, excellent friction and minimum wear. Ensures smooth engagement and disengagement as well as gear shifting, which significantly increases driving pleasure. Tested for use with catalytic converters and on racing machines. Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. Suitable for sporting applications. For engines with or without a wet clutch. Applic­a­tionNote the engine manufactures’ operating instructions. Note:&nbsp;Optimum effectiveness only when the product is used unmixed. SpecificationsAPI SP, JASO MA2

_oil_1618995956.jpg

LIQUI MOLY MOTORBIKE 4T SYNTH 10W-40 STREET RACE FULL SYNTHETIC 1L

Premium class low-friction motor oil.&nbsp;Provides outstanding protection against wear, lowers oil and fuel consumption, keeps the engine clean and ensures fast oil penetration.Ideal for modern Asian and American gasoline engines. Especially where there are long intervals between oil changes and high requirements on the engine.<h2>Applic­a­tion :</h2>The specifications and instructions from the unit or vehicle manufacturer must be followed. Optimum effectiveness only when the product is used unmixed.<h2>Specifications / Approvals :</h2>API SQ, ILSAC GF-7BLIQUI MOLY recommends this product for vehicles or assemblies for which the following specifications or original spare part numbers are requiredHonda, Lexus, Suzuki, Toyota

LIQUI-MOLY-SPECIAL-TEC-AA-0W-16-SYNTHETIC-4La5631262-bc7a-43d6-9cf3-d1f2bae91873.jpg

LIQUI MOLY SPECIAL TEC AA 0W-16 SYNTHETIC 4L

Can be used for gasoline vehicles and for diesel vehicles without diesel particulate filter.Top-quality, state-of-the-art low-viscosity motor oil for gasoline and diesel engines without diesel particulate filter (DPF). The combination of unconventional base oils on a synthetic technology basis and the latest additive technology serves to guarantee a motor oil which reduces both oil and fuel consumption while ensuring fast oil penetration of the engine. Oil change intervals of up to 40,000&nbsp;km are thus possible, depending on the manufacturer's specifications. All-season oil for modern gasoline and diesel engines with multi-valve technology and turbocharging with and without charge air cooling. Especially suitable where there are long intervals between oil changes and heavy duty engine requirements. Tested for turbochargers and catalytic converters. Applic­a­tion :Note the operating instructions of the vehicle and engine manufacturers. Specifications / Approvals :ACEA A3, ACEA B4, API SP, BMW Longlife-01, MB-Approval 229.5, Peugeot Citroen (PSA) B71 2296, Porsche A40, Renault RN 0700, Renault RN 0710, VW 502 00, VW 505 00 LIQUI MOLY recommends this product for vehicles or assemblies for which the following specifications or original spare part numbers are requiredChrysler MS-10725, Chrysler MS-10850, Fiat 9.55535-H2, Fiat 9.55535-M2, Fiat 9.55535-N2, Fiat 9.55535-Z2, GWM, HAVAL, Opel GM-LL-B-025, Peugeot Citroen (PSA) B71 2294

LIQUI-MOLY-LEICHTLAUF-HIGH-TECH-5W-40-SYNTHETIC-4Lab5ed6a5-a682-4c67-a379-16ce1e04eff1.jpg

LIQUI MOLY LEICHTLAUF HIGH TECH 5W-40 SYNTHETIC 4L

Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.

_oil_1557216741.jpg

LIQUI MOLY MOTORBIKE CHAIN AND BRAKE CLEANER 500ML

<ul><li>Add to fuel in all 4-cycle engines (carburetor and injection system).&nbsp;</li><li>80 ml sufficient for 5 to 10-liter fuel.&nbsp;</li><li>Add every time you fill-up.&nbsp;</li><li>Protects the entire fuel system.&nbsp;</li><li>Reliable performance</li></ul>

_oil_1569477143.jpg

LIQUI MOLY MOTORBIKE 4T ADDITIVE SHOOTER 80ML

High performance low-friction motor oil for year-round use. The combination of unconventional base oils and advanced additive technology as well as the special Molygen additive ensures that the motor oil is of low viscosity with a high shear stability and reliably prevents the formation of deposits, significantly reduces frictional losses in the engine and provides the optimum protection from wear. This results in fuel savings and an extended service life for the engine.Ideal for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value retention of the engine during long intervals between oil changes and where there are extreme demands on the engine. Applic­a­tion :The specifications and instructions from the unit or vehicle manufacturer must be followed. Can be mixed with all commercially available motor oils. Optimum effectiveness only when the product is used unmixed. Specifications / Approvals :API SQ, ILSAC GF-7A LIQUI MOLY recommends this product for vehicles or assemblies for which the following specifications or original spare part numbers are requiredChrysler MS-6395, Fiat 9.55535-CR1, Ford WSS-M2C 947-A, Ford WSS-M2C 947-B1, Ford WSS-M2C 962-A1, GM 6094 M, GM dexos1 Gen 3, Honda, Hyundai, Kia, Mazda, Mitsubishi, Mitsubishi Dia Queen, Nissan, Subaru, Toyota

LIQUI-MOLY-MOLYGEN-0W-20-SYNTHETIC-4L8969be84-be5b-4dc3-bf2d-dd6ccf8baa00.jpg

LIQUI MOLY MOLYGEN 0W-20 ADVANCED FULL SYNTHETIC 4L

Suitable for all 2-stroke and 4-stroke engines. 20 ml (1 tube) sufficient for 1 l of motor oil. 2-stroke engines: 10 ml per 10 l of fuel mixture or 20 ml for 400 ml of 2-stroke oil. Tested on engines with catalytic converters.

_oil_1576653324.jpg

LIQUI MOLY MOTORBIKE MoS2 SHOOTER 20ML

Modern premium-class fuel-efficient engine oil, which especially has been developed for the year-round use in Asian and American vehicles. The combination of unconventional base oils on synthesis technology in connection with the latest additives guarantees an engine oil which protects against wear, reduces the oil and fuel consumption, keeps the engine clean and provides for a quick oiling of the engine.<h3>APPROVALS:</h3><ul><li>API SP + RC</li><li>ILSAC GF-6A</li></ul><h3>LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:</h3><ul><li>Chrysler MS-6395</li><li>Ford WSS-M2C 947-A</li><li>Ford WSS-M2C 947-B1</li><li>GM</li><li>GM 6094 M</li><li>Honda</li><li>Hyundai</li><li>Kia</li><li>Mazda</li><li>Mitsubishi Dia Queen</li><li>Nissan</li><li>Toyota</li></ul>

LIQUI-MOLY-SPECIAL-TEC-AA-0W-20-SYNTHETIC-4L5521e0eb-5b7e-4d4e-bd0f-27901e5c4e0e.jpg

LIQUI MOLY SPECIAL TEC AA 0W-20 SYNTHETIC 4L

Power pack tried and tested in motor sports that boosts the octane number of the gasoline and ensures that the engine can tap its full performance potential. Optimizes combustion immediately after addition and increases fuel efficiency. Significantly improves torque and acceleration, guaranteeing more driving pleasure. Ensures cleanliness in the fuel system and injection nozzles, thus preventing expensive repairs.For all cars with 2 and 4-stroke gasoline engines without particulate filter. Specially developed for racing use and therefore not recommended for public road traffic. 200&nbsp;ml is sufficient for up to 50&nbsp;l of fuel. Applic­a­tion200&nbsp;ml sufficient for up to 50&nbsp;l of fuel. Add the contents directly to the tank. Mixing takes place automatically. Note manufacturer's instructions!

_oil_1615018847.jpg

LIQUI MOLY OCTANE BOOSTER 200ML

For the intake and throttle valve area including nozzles and holes. Only suitable for use in gasoline engines.

_oil_1576653489.jpg

LIQUI MOLY PRO-LINE THROTTLE VALVE CLEANER 400ML

LIQUI MOLY Motorbike Kettenspray (Chain Lube) 250 mlA fully synthetic, highly adhesive and water‑resistant chain lubricant in aerosol form. It provides outstanding penetration (“creep effect”) and long-lasting lubrication, ideal for high-speed motorcycle chains. Helps reduce chain wear and elongation, extending service life. Apply after cleaning with chain cleaner for optimal performance.

LIQUI-MOLY-MOTORBIKE-KETTEN-SPRAAY-CHAIN-LUBE-250ML26228636-b4cc-4b8c-8e06-8770971ced40.jpg

LIQUI MOLY MOTORBIKE KETTEN SPRAY CHAIN LUBE 250ML

Used for all cooling systems and engines, particularly aluminum high-performance engines in passenger cars, commercial vehicles, motorcycles, buses, agricultural machines as well as stationary engines and equipment that require cooling system protection of this quality.

_oil_1610610515.jpg

LIQUI MOLY RAF 12+ PREMIXED COOLANT RED 1L

For 2 and 4 stroke gasoline engines (carburetors and injectors).&nbsp;80 ml is enough for up to 10 liters of fuel.&nbsp;Recommendation for use at each refueling

_oil_1615028830.jpg

LIQUI MOLY MOTORBIKE SPEED ADDITIVE ​​SHOOTER 80ML

High-performance motor oil based on synthetic technology. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.

_oil_1570686484.jpg

LIQUI MOLY MOTORBIKE 4T 10W-30 STREET SEMI SYNTHETIC 1L

High-performance motor oil. Ensures maximum performance and protection of the engine under all operating conditions. Optimum lubrication, outstanding engine cleanliness, excellent friction values and minimum wear are just as much par for the course as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.Developed for air and water-cooled 4-stroke engines exposed to normal to extreme operating conditions. For sporting applications. Suitable for engines with or without a wet clutch.<h3>Applic­a­tion :</h3> The operating instructions of the engine manufacturers must be followed<h3>Specifications :</h3> API SP, JASO MA2

LIQUI-MOLY-MOTORBIKE-4T-15W-50-STREET-SEMI-SYNTHETIC-1Lb7011ced-0e20-47bd-a9b4-0f4c760070ff.jpg

LIQUI MOLY MOTORBIKE 4T 15W-50 STREET SEMI SYNTHETIC 1L

Low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear. The results are savings in fuel and an extended service life for the engine.Ideal for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value retention of the engine during long intervals between oil changes and with high loads.<h2>Applic­a­tion :</h2>Note the vehicle and engine manufacturers' operating instructions. Can be mixed with all commercially available motor oils.&nbsp;Full effectiveness only achieved when the product is not mixed.<h2>Specifications / Approvals :</h2>API SQ, ILSAC GF-7ALIQUI MOLY recommends this product for vehicles or assemblies for which the following specifications or original spare part numbers are requiredChrysler, Chrysler MS-6395, Daihatsu, Fiat 9.55535-CR1, Ford, Ford WSS-M2C 946-A, Ford WSS-M2C 946-B1, Ford WSS-M2C 961-A1, GM 6094 M, GM dexos1 Gen 3, GWM, HAVAL, Honda, Hyundai, Isuzu, Kia, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota, Wuling