"RAVENOL TSi SAE 10W-40 is a high additive treated engine oil which allows an energy-saving operation because of its additivation, choice of base oils and viscosity adjustment. In order to guarantee the low viscosity of the SAE class 10W as well as a low evaporation loss RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils and polyalphaolefins (PAO) which correspond to the high tech demands. RAVENOL TSi SAE 10W-40 contains less than 30 % Polyalphaolefins (PAO). Application Notes RAVENOL TSi SAE 10W-40 is suitable for all modern cars with petrol and diesel engines all the year; no sludge in the motor, excellent results during the test run. High engine cleanness is guaranteed also in case of turbo charging and a complete catalyst operation as well as multi valves and diesel direct injections."

_oil_1556779918.jpg

RAVENOL TSI 10W-40 SEMI SYNTHETIC 4L

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J1703, ISO 4925 and the safety regulations FMVSS 116 DOT3 and DOT4 from the United States of America are exceeded.Application NotesRAVENOL DOT 4 can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.RAVENOL DOT 4 is miscible with all known brake fluids of the same specification.

_oil_1556789254.jpg

RAVENOL DOT 4 BRAKE FLUID 500ML

RAVENOL Motobike 4-T Ester SAE 10W-30 is a semi synthetic engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. With RAVENOL Motobike 4-T Ester SAE 10W-30 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings. The excellent cold start behaviour provides optimum lubrication safety during the cold run phase. RAVENOL Motobike 4-T Ester SAE 10W-30 fulfils the high tech demands of the latest powerful engine generation. Application Notes: RAVENOL Motobike 4-T Ester SAE 10W-30 is suitable as a high performance low friction engine oil for all motorbikes in case the specification SAE 10W-30 is requested.

_oil_1556785834.jpg

RAVENOL MOTOBIKE 4-TAKT 10W-30 SEMI SYNTHETIC 1L

RAVENOL Formel Extra 20W-50 is a mineral multigrade engine oil for passenger car gasoline and diesel engines with and without turbocharging and is also suitable for commercial vehicle engines. Designed to minimize friction and wear, the formulation ensures year round high lubricity throughout all operating conditions. Extended oil drain capability where recommended by the vehicle manufacturer. This really is a high spec mineral oil which is also suitable for many historic racing applications or where air cooled engines are used in racing such as the 750 Motor Club's RAVENOL Formula V Series.

_oil_1556781115.jpg

RAVENOL FORMEL EXTRA 20W-50 MINERAL 1L

RAVENOL Motobike 4-T Ester SAE 10W-40 is a future-oriented engine oil which was especially produced for 4 stroke motorbikes. It provides a fuel saving operation of the engines. With RAVENOL Motobike 4-T Ester SAE 10W-40 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings The excellent cold start behaviour provides an optimum lubrication safety during the cold run phase. RAVENOL Motobike 4-T Ester SAE 10W-40 fulfils the high tech demands of the latest powerful engine generation. Application Notes: RAVENOL Motobike 4-T Ester SAE 10W-40 is suitable as a high performance low friction engine oil for all motorbikes in case the specification JASO MA2 T904:2006 SAE 10W-40 is requested.

_oil_1556785761.jpg

RAVENOL MOTOBIKE 4-TAKT 10W-40 SEMI SYNTHETIC 1L

RAVENOL Motobike 4-T 20W-40 Mineral is a mineral-based 4 stroke multigrade engine oil especially formulated for 4 stroke motorcycle engines. The high quality formulation and specially balanced additive package ensures compatibility with all components, including wet clutch and oil lubricated couplings, and offers optimum lubrication throughout all conditions and temperatures. Application Notes: RAVENOL Motobike 4-T 20W-40 Mineral is suitable for all motorcycles where a lubricant of the specification SAE 20W-40 is required. Especially recommended for older, larger-engined bikes, and many high performance classic machines which demand this grade of oil. Always consult the manufacturers handbook to ensure correct application.

_oil_1556785633.jpg

RAVENOL MOTOBIKE 4-TAKT 20W-40 MINERAL 1L

RAVENOL DOT 4 BRAKE FLUID 1L

RAVENOL DOT 4 BRAKE FLUID 250ML

RAVENOL Eco Synth ECS SAE 0W-20 is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol and diesel engines with and without turbo-charging and direct injection. RAVENOL Eco Synth ECS SAE 0W-20 therefore minimizes friction, wear and tear and fuel consumption, and delivers excellent cold start performance. HTHS min. 2,6 mPa*s. With its new formulation, RAVENOL Eco Synth ECS SAE 0W-20 provides a safe layer of lubrication even at very high operating temperatures and protects from corrosion and loss of oil through oxidation or coking. The excellent cold start behaviour ensures optimum lubrication safety during the cold running phase. By significantly reducing fuel consumption, RAVENOL Eco Synth ECS SAE 0W-20 helps to protect the environment by reducing emissions. Extended oil change intervals according to the manufacturer’s instructions. Application Notes RAVENOL Eco Synth ECS SAE 0W-20 is a universal fuel-economy engine oil, suitable for all modern passenger car gasoline and diesel engines where this grade of oil is recommended.

_oil_1570861454.jpg

RAVENOL ECS ECO 0W-20 FULL SYNTHETIC 4L

"RAVENOL VMO 5W-40 is a universal fully synthetic low friction motor oil with CleanSynto® technology based on PAO Poly-alpha-olefin synthetic technology, and has been developed for use in many modern passenger car with both petrol and diesel engines, including those with Pumpe-Düse technology. The special formulation ensures excellent cold start behaviour and optimal lubrication in the cold running phase. Due to a significant fuel efficiency increase, RAVENOL VMO 5W-40 contributes to conservation of the environment by reducing emissions. It meets EURO IV and EURO V standards for significantly reduced exhaust emissions and extends the life of DPF and TWC's. Minimal wear extends the lifespan of the engine. Extended oil change capability according to manufacturer requirements. Application RAVENOL VMO 5W-40 is a universal synthetic low friction motor oil suitable for gasoline and diesel engines in passenger cars and light vans, with and without turbocharger, especially developed for Pumpe-Düse diesel engines. Due to the specific composition "

_oil_1556778259.jpg

RAVENOL VMO 5W-40 SYNTHETIC 4L

RAVENOL EHS SAE 0W-20&nbsp;is synthetic, low-friction engine oil with CleanSynto® technology for car gasoline and diesel engines, with and without turbocharging and direct injection. Minimizes friction, wear and fuel consumption, and is suitable for extended oil drain intervals according to manufacturer's instructions.RAVENOL EHS SAE 0W-20&nbsp;achieves a high viscosity index through its formulation with special base oils. The excellent cold start behavior ensures optimum lubrication safety during the cold running phase. By a significant fuel economy&nbsp;RAVENOL EHS SAE 0W-20&nbsp;contributes by reducing emissions to protect the environment.RAVENOL EHS SAE 0W-20&nbsp;ensures compliance with the viscosity class even over long oil runtimes over the entire oil change interval.

_oil_1605699482.jpg

RAVENOL EHS 0W-20 SYNTHETIC 4L

RAVENOL HDS Hydrocrack Diesel Specific 5W-30&nbsp;is based on additives with reduced ash content for use in modern passenger car with diesel engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. RAVENOL HDS Hydrocrack Diesel Specific 5W-30&nbsp;achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.Suitable for extended oil change intervals where recommended by manufacturer.

hdsf2614b18-7bd4-4e23-8fd2-2f2894d666ad.jpg

RAVENOL HDS 5W-30 DIESEL SYNTHETIC 5L

RAVENOL FET Fuel Efficiency Truck SAE 5W-30&nbsp;is suitable for diesel fuel with a sulphur content of up to 15ppm and can be used in the latest exhaust gas- optimized engines with exhaust gas treatment such as DPF diesel particulate filters and other systems.RAVENOL FET Fuel Efficiency Truck SAE 5W-30 contains shear-stable ingredients and improves engine performance, reliability and cleanliness. It delivers significant improvements to oxidation resistance, air supply, shear stability, wear and tear, deposits and a reduction in fuel consumption.

fete9861abb-de60-472c-a0fd-0933e7373b0b.jpg

RAVENOL FET 5W-30 DIESEL SYNTHETIC 5L

RAVENOL VFE SAE 5W-20&nbsp;is a synthetic, low-friction engine oil with CleanSynto® technology for passenger car gasoline and diesel engines, with and without turbocharging and direct injection.RAVENOL VFE SAE 5W-20&nbsp;achieves a high viscosity index through its formulation with special base oils. The excellent cold start behaviour provides an optimum lubricating safety during the cold run phase.Because of a considerable fuel saving&nbsp;RAVENOL VFE SAE 5W-20&nbsp;contributes to protect the environment by reducing the emissions.RAVENOL VFE SAE 5W-20&nbsp;minimizes friction, wear and fuel consumption with excellent cold start characteristics.Suitable for extended oil change intervals where recommended by manufacturer.

vfec180da7d-7dc3-4acf-8476-1a95b71867c8.jpg

RAVENOL VFE 5W-20 SYNTHETIC 5L

RAVENOL FEL SAE 5W-30 is a fully synthetic, fuel economy low friction motor oil based on mid SAPS Technology for latest petrol and diesel passenger cars with and without turbo charging in passenger cars and transporters with extended oil change. RAVENOL FEL SAE 5W-30 is based on additives with low ash content for use in modern passenger car with diesel and gasoline engines with excellent cold start characteristics, low oil consumption and reduced pollutant emissions. This oil will increase the DPF and TWC life. HTHS &gt;2,9mPa.s. Developed for fuel economy and energy conserving in EURO IV and EURO V Standard engines with normal and extended oil change intervals (until 50.000 km or 2 years possible). RAVENOL FEL SAE 5W-30 achieved by its formulation with special base oils a high viscosity index. The excellent cold start behaviour ensures a optimal lubrication safety in the cold running phase. Due to a significant fuel economy RAVENOL FEL SAE 5W-30 contributes by reduction of emissions to conservation the environment. Minimal wear extends the lifespan of the engine. Application Notes RAVENOL FEL SAE 5W-30 is a universal fuel economy, especially collected engine oil for modern gasoline and diesel engines with and without turbo charger in passenger cars and vans with extended oil change intervals. Extend the lifespan of the particle filter. Due to the specific composition is RAVENOL FEL SAE 5W-30 excellent suitable for use for indicated OEM requirements.

_oil_1570860918.jpg

RAVENOL FEL 5W-30 FULL SYNTHETIC 4L

RAVENOL DXG SAE 5W-30&nbsp;is a PAO (Polyalphaolefin) based, fully synthetic low friction motor oil with especially USVO® and proven CleanSynto® technology for passenger car petrol engines with and without turbo-charging and direct injection.For the development of&nbsp;RAVENOL DXG SAE 5W-30&nbsp;the proven formulation of tri-nuclear molybdenum, tungsten and OFM (Organic Friction Modifiers) was used. A highly polar Group V base oil was used in this formula, which has good compatibility with the PAO used.Due to the USVO®&nbsp;technology we achieve an extremely high viscosity stability. We avoid the disadvantages of polymeric viscosity improvers while taking advantage of them. This improves engine protection, performance, engine cleanliness and oil drain intervals. The USVO®&nbsp;technology makes it possible that the product has no shear losses during the entire change interval and is extremely stable to oxidation. This unique technology helps oil to be lubricated faster, thereby minimizing friction while keeping the engine clean and efficient.

_oil_1608731053.jpg

RAVENOL DXG 5W-30 FULL SYNTHETIC 4L

RAVENOL Motobike 4-T Mineral SAE 20W-50 is an engine oil on mineral oil base with excellent additives which was especially produced for 4 stroke motorbikes. With RAVENOL Motobike 4-T Mineral SAE 20W-50 a solid and high loadable engine oil was developed for superior engines of motorbikes with wet couplings and oil lubricated couplings. RAVENOL Motobike 4-T Mineral SAE 20W-50 has an excellent lubricating film adhesive capacity and a very good shear stability as well as an excellent cleaning power and a high aging resistance. Application Notes: RAVENOL Motobike 4-T Mineral SAE 20W-50 is suitable as an engine oil for all motorbikes in case the specification SAE 20W-50 JASO MA/MA2 is requested.

_oil_1556785491.jpg

RAVENOL MOTOBIKE 4-TAKT 20W-50 MINERAL 1L

"RAVENOL TSJ SAE 10W-30 is a semi-synthetic low friction motor oil with CleanSynto® technology with polyalphaolefin for passenger car petrol and diesel engines with and without turbo-charging and direct injection. Formulated to minimise friction, wear and fuel consumption with excellent cold start characteristics. Suitable for extended oil change intervals where recommended by manufacturer. RAVENOL TSJ SAE 10W-30 is especially produced for the use in cars of Japanese and Asian manufacturers. Application Notes RAVENOL TSJ SAE 10W-30 is suitable for the use in all modern cars of Japanese and Asian manufacturers all the year."