Non silicone high performance synthetic brake fluid for disc and drum braking systems. Suitable for braking systems with electronic antilock and stability devices. Suitable also for vehicles with friction servo-control systems. Fully complying with DOT 5.1 brake fluids performance limits.Performance levels:FMVSS N°116 - DOT 3 / DOT 4 / DOT 5.1, SAE J 1703, SAE J 1704, ISO 4925.

PAKELO-DOT-5-1-BRAKE-FLUID-EXTRA-1L0cffe9d1-86a3-492b-8927-3ea2688c0fd7.jpg

PAKELO DOT 5.1 BRAKE FLUID EXTRA 1L

Flamingo-Dot-4-Oilcod0b5cd75-6104-4e30-9b89-7d7a65ecccbe.jpg

FLAMINGO DOT 4 BRAKE FLUID 250ML

High performance brake fluid for use in modern, high performance vehicles. Minimum wet boiling point of 180°C. Can be mixed safely with other DOT 3 and DOT 4 fluids.

_oil_1594644459.jpg

MOBIL DOT 4 BRAKE FLUID 500ML

Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in the operating circuit; therefore, preserving its integrity.Wet Boiling point sea 165 degree Celsius

_oil_1561731973.jpg

BREMBO PREMIUM DOT 4 BRAKE FLUID 500ML

Brake and Clutch Fluid DOT 4 is a high quality, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems under normal service conditions.

_oil_1555397619.jpg

CALTEX DOT 4 BRAKE AND CLUTCH FLUID 500ML

BIZOL Brake Fluid DOT 4 is a fully synthetic high-performance brake fluid for the use in all hydraulic brake systems of passenger cars and commercial vehicles. Because of the optimum combination of the synthetic base with a modern additive package, it reliably protects from corrosion as well as oxidation.

_oil_1579689078.jpg

BIZOL DOT 4 BRAKE FLUID 500ML

<h6>The brake fluids approved for all MB vehicle models are listed on Sheet 331.0. These brake fluids correspond to the requirements of the US safety regulations FMVSS 116, DOT 4, in addition to our requirements. The approved "DOT 4 plus" brake fluids (internal designation) are more advanced DOT 4 brake fluids with a higher wet boiling point, standard change interval: 2 years. To maintain this service life without any problems, we urgently advise the use of the approved products as per Sheet 331.0. During the warranty phase this is a requirement if any customer claims are to be recognized.</h6><h6>The brake fluid "DOT 4 type 200" listed on Sheet 331.1 is approved for special applications in the UNIMOG field with even greater thermal demands. In this application, a brake fluid change interval of 1 year must be observed</h6>

_oil_1598088515.jpg

MERCEDES BENZ OEM DOT 4 BRAKE FLUID 1L

The product is designed for the brake systems of Honda and Acura cars (including sports models in this list).&nbsp;Genuine dot 4 brake fluid has low compressibility and provides instant brake response at the moment you press the pedal.

BFa2389ecc-dde5-4504-b75d-3c877bf77621.jpg

HONDA ULTRA DOT 4 BRAKE FLUID 500ML

SEIKEN-DOT-3-BRAKE-FLUID-355ML8c6b2477-9610-427c-b1f8-c892e762ecbc.jpg

SEIKEN DOT 3 BRAKE FLUID 355ML

MOTUL RBF 660 Racing Factory Line DOT 4 100% Synthetic Brake Fluid may be used for all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing to minimize air entrance for brake cooling. Can also be used with conventional steel rotors and clutch systems. Widely exceeds DOT 3, DOT4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C). PERFORMANCESTANDARDS : FMVSS 116 DOT 4 / SAE J1703 &amp; J1704 / ISO 4925 Extreme thermal resistance and stability:Very high boiling point (325°C / 617°F), superior to conventional DOT5.1 non silicone base / DOT5 silicone base fluids (260°C / 500°F mini) and DOT4 (230°C / 446°F mini) Enables effective brake even in extreme conditions.Better aerodynamic performance by reducing air entrance for brake cooling for cars. Efficient when rainy:Very high wet boiling point (204°C / 400\°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini enables to keep efficient braking while rainy. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get vapour lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 % of water. RECOMMENDATIONSAvoid mixing with polyglycols based brake fluid.Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).Store brake fluid in its original container, tightly closed to prevent moisture absorption.Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. PROPERTIES100% synthetic fluid, polyglycol bases.Colour AmberDry boiling point 325°C / 617°FWet boiling point 204°C / 400°FViscosity at -40°C (-40°F) 1698 mm°/sViscosity at 100°C (212°F) 2.59 mm°/s

_oil_1561575151.jpg

MOTUL RBF 660 RACING DOT 4 BRAKE FLUID 500ML

Lubrex’s Stop is a completely synthetic brake oil based on polyalkylene glycol ethers and borate esters with a high boiling point. Stop is a very versatile brake oil, suitable for use in ABS systems as well as hydraulic clutch systems in cars, commercial vehicles, off-road vehicles, agricultural vehicles and motorcycles. Stop has an exceptionally high thermal stability as well as exceptional compatibility with seals and excellent thermal and viscous properties. Stop can also be used when mixed with other Dot-3 and Dot-4 brake oils.wet boiling point 280C

STOP-f85efd6f-e61d-43ba-9ddf-7894de571350.jpg

LUBREX STOP DOT 4 BRAKE FLUID 500ML

Rear-RX8e6776824-bc03-4f03-98c9-3a460ea0c638.jpg

MAZDA OEM REAR BRAKE PAD FOR RX8

_oil_161993269398898567-f20e-4c83-bd08-d00fe50c2447.jpg

MITSUBISHI OEM BRAKE FLUID SUPER 4 500ML

BENZ132f03c5-5f7f-42bd-bfee-9c0216dcb50c.jpg

MERCEDES BENZ OEM DOT 4 PLUS BRAKE FLUID 1L

Japan Formula Motor Vehicle Brake Oil Genuine Seiken BF4 Heavy Duty Brake Fluid

bf4acb07ad4-4c01-4efe-9710-a06aba960fca.jpg

SEIKEN DOT 4 BRAKE FLUID 1L

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J1703, ISO 4925 and the safety regulations FMVSS 116 DOT3 and DOT4 from the United States of America are exceeded.Application NotesRAVENOL DOT 4 can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.RAVENOL DOT 4 is miscible with all known brake fluids of the same specification.

_oil_1556789254.jpg

RAVENOL DOT 4 BRAKE FLUID 1L

RAVENOL DOT 4 BRAKE FLUID 250ML

RAVENOL DOT 4 BRAKE FLUID 500ML

Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in operating circuit; therefore, preserving its integrity.