AISIN-DOT-3-BRAKE-CLUTCH-FLUID-250ml9b3c2378-86a8-476a-bf89-1542a278b6e4.jpg

AISIN DOT 3 BRAKE & CLUTCH FLUID 250ml

AISIN-BRAKE-CLUTCH-FLUID-DOT3-500mlaa1df113-0d24-4490-b4ba-a2a933cbfb13.jpg

AISIN  DOT 3 BRAKE & CLUTCH FLUID 500ml

AISIN-DOT-3-BRAKE-CLUTCH-FLUID-1Lb438c1e3-f105-4dac-b6cd-c0a214f0d633.jpg

AISIN DOT 3 BRAKE & CLUTCH FLUID 1L

Brembo Premium brake fluids have a higher boiling point that exceeds the standard, thus offering superior resistance to the Vapour Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties and resistance to oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in the operating circuit; therefore, preserving its integrity.Wet Boiling point sea 165 degree Celsius

BREMBO-PREMIUM-DOT-4-BRAKE-FLUID-500ML31dc1b97-8b5d-4665-9c4d-64eeeefa7b60.jpg

BREMBO PREMIUM DOT 4 BRAKE FLUID 500ML

Description : TOYOTA GENUINE DOT 3 BRAKE FLUID 354ML Toyota Genuine Brake fluid is an extra high performance brake fluid for use in Automotive Disc, anti-skid brake &amp; clutch system.&nbsp; Feature&gt; High boiling point&gt; Contains antioxidant, corrosion inhibitor, Anti rust &amp; anti wear additives&gt; Provide higher performance&gt; Minimise the water absorption &amp; variation in boiling point.&gt; Minimise rubber swelling that cause the leakage of brake fluid.&gt; Highly recommended by Toyota for Toyota vehicles&gt; More than 40,000 kms mileage

Toyota-TMO-Chemical-Brake-Fluid-DOT-3-354ML46c846d1-4dbd-4a0d-9cd5-fa16a12903bf.jpg

TOYOTA TMO CHEMICAL BREAK FLUID DOT 3 354ML

SEIKEN-DOT-3-BRAKE-FLUID-355ML8c6b2477-9610-427c-b1f8-c892e762ecbc.jpg

SEIKEN DOT 3 BRAKE FLUID 355ML

&nbsp;DescriptionBrake fluid, intended for hydraulic brake systems. Its composition provides a high chemical stability, excellent resistance against residue formation, very good stability towards oxidation and is compatible with all materials present in the circuit.&nbsp;ApplicationsIt is suitable for all hydraulic brake circuits where the manufacturer recommends a fluid, which meets the specifications mentioned below. It is also suitable for numerous steering and clutch systems and can be used from -40°C till 260°C.&nbsp;PerformanceThanks to its high boiling point, this fluid guarantees safe brake performance. Its formulation has been adapted to reduce the risk of oxidation and residues and to ensure long and reliable service. Meets Industry Specifications<ul><li>FMVSS - 116 DOT 4</li><li>FMVSS - 116 DOT3</li><li>ISO - 4925 Class 3&amp;4</li><li>SAE - J 1703</li><li>SAE - J 1704</li></ul>

CHAMPION-DOT-34-BRAKE-FLUID-250ML3da3b2f3-fb71-487e-8f60-1025beab8df2.jpg

CHAMPION DOT 3/4 BRAKE FLUID 250ML

High performance brake fluid for use in modern, high performance vehicles. Minimum wet boiling point of 180°C. Can be mixed safely with other DOT 3 and DOT 4 fluids.

_oil_1594644459.jpg

MOBIL DOT 4 BRAKE FLUID 500ML

&nbsp;DescriptionSynthetic brake fluid, intended for hydraulic brake systems, where a superior quality is required. Its composition provides a high chemical stability, excellent resistance against residues, high resistance against oxidation and can be used with all materials, normally used in brake systems.&nbsp;ApplicationsIt is used in all hydraulic brake systems (including ABS), for which manufacturers require a fluid, meeting the characteristics mentioned hereunder. Also suited as power steering and torque convertor fluid. Application field : from -40°C till 270°C.&nbsp;PerformanceThis excellent quality hydraulic has been formulated to ensure outstanding brake system protection by eliminating the risk of contamination or leakage. Safe and reliable braking is guaranteed by the high boiling point of this fluid.Meets Industry Specifications<ul><li>FMVSS - 116 DOT 4</li><li>FMVSS - 116 DOT 5.1</li><li>FMVSS - 116 DOT3</li><li>ISO - 4925 Class 3&amp;4</li><li>ISO - 4925 Class 5.1</li><li>SAE - J 1703</li><li>SAE - J 1704</li></ul>

CHAMPION-DOT-5-1-BRAKE-FLUID-500MLe4e77c58-d3b8-4c27-aa01-58e28c30a400.jpg

CHAMPION DOT 5.1 BRAKE FLUID 500ML

<h6>The brake fluids approved for all MB vehicle models are listed on Sheet 331.0. These brake fluids correspond to the requirements of the US safety regulations FMVSS 116, DOT 4, in addition to our requirements. The approved "DOT 4 plus" brake fluids (internal designation) are more advanced DOT 4 brake fluids with a higher wet boiling point, standard change interval: 2 years. To maintain this service life without any problems, we urgently advise the use of the approved products as per Sheet 331.0. During the warranty phase this is a requirement if any customer claims are to be recognized.</h6><h6>The brake fluid "DOT 4 type 200" listed on Sheet 331.1 is approved for special applications in the UNIMOG field with even greater thermal demands. In this application, a brake fluid change interval of 1 year must be observed</h6>

_oil_1598088515.jpg

MERCEDES BENZ OEM DOT 4 BRAKE FLUID 1L

SHELL-DOT-4-BRAKE-FLUID-EXTRA-500MLc64888a9-cf07-4573-9546-5eff1db1212d.jpg

SHELL DOT 4 BRAKE FLUID EXTRA 500ML

Brake and Clutch Fluid DOT 4 is a high quality, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems under normal service conditions.

_oil_1555397619.jpg

CALTEX DOT 4 BRAKE AND CLUTCH FLUID 500ML

_oil_1612956744.jpg

BMW OEM DOT 4 BRAKE FLUID 1L

BENZ132f03c5-5f7f-42bd-bfee-9c0216dcb50c.jpg

MERCEDES BENZ OEM DOT 4 PLUS BRAKE FLUID 1L

Synthetic Brake FluidA synthetic brake fluid based on glycol ether compounds, alkyl polyglycol compounds, and glycol ether ester compounds. It contains inhibitors to prevent corrosion of metal brake components and to reduce oxidation at high temperatures. The brake fluid is characterized by a high boiling point in both dry and wet conditions, ensuring safe braking even after absorbing small amounts of moisture over extended use. Additionally, special dehumidifying agents help prevent vapor bubble formation.Ideally suited for use with all disc and drum brake systems, as well as clutch systems in motor vehicles that require a synthetic brake fluid of this specification. It is also perfectly compatible with ABS brake systems.ApplicationCan be used with all conventional brake fluid bleeding equipment. It offers excellent miscibility and is compatible with all high-quality synthetic brake fluids. However, the optimal performance of this brake fluid is only guaranteed when used on its own. It is recommended to replace the brake fluid according to the vehicle manufacturer's specifications.Warning:Brake fluid is corrosive to vehicle paint. In case of spillage, immediately rinse the affected area with plenty of water. Do not use this product in central hydraulic systems that require mineral oil-based fluids. Always follow the vehicle manufacturer's instructions.Specifications / ApprovalsFMVSS 116 DOT 3, FMVSS 116 DOT 4, ISO 4925 Class 3, ISO 4925 Class 4, SAE J 1703, SAE J 1704

LIQUI-MOLY-DOT-4-BRAKE-FLUID-500MLc0044bf0-168f-4b73-97e8-7294f9360892.jpg

LIQUI MOLY DOT 4 BRAKE FLUID 500ML

TCL Brake Fluid is a high quality product which is a result of TCL’s pursuit of safety. It is the result of consistent R &amp; D by TCL in refining the glycol and glycol ethers to produce the brake fluid.TCL brake fluid is a high performance brake fluid that exceeds US standard&nbsp;FMVSS&nbsp;and has a high boiling point with stable performance even under the harshest of operating conditions.TCL brake fluid also keep the rubber in a proper state at high temperature. It will offer a safe drive. It has less influence on the cylinder, and it is also thorough anti-corrosion measures. It will reduce the rust of important metal parts that are essential to the running of the car, and you will drive your car comfortable in a smooth braking.

_oil_1612697972.jpg

TCL DOT 3 BRAKE FLUID 500ML

RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics. There is a chemical stability and it is provided with additives which save the best lubrication efficiency.Because of the special formulation of RAVENOL DOT 4 the international specifications SAE J1703, ISO 4925 and the safety regulations FMVSS 116 DOT3 and DOT4 from the United States of America are exceeded.Application NotesRAVENOL DOT 4 can be used in all vehicles for which the DOT 4 specification for brake fluids is required. It is suitable for all hydraulic brake systems with synthetic fluids.RAVENOL DOT 4 is miscible with all known brake fluids of the same specification.

_oil_1556789254.jpg

RAVENOL DOT 4 BRAKE FLUID 250ML

MOTUL RBF 660 Racing Factory Line DOT 4 100% Synthetic Brake Fluid may be used for all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing to minimize air entrance for brake cooling. Can also be used with conventional steel rotors and clutch systems. Widely exceeds DOT 3, DOT4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C). PERFORMANCESTANDARDS : FMVSS 116 DOT 4 / SAE J1703 &amp; J1704 / ISO 4925 Extreme thermal resistance and stability:Very high boiling point (325°C / 617°F), superior to conventional DOT5.1 non silicone base / DOT5 silicone base fluids (260°C / 500°F mini) and DOT4 (230°C / 446°F mini) Enables effective brake even in extreme conditions.Better aerodynamic performance by reducing air entrance for brake cooling for cars. Efficient when rainy:Very high wet boiling point (204°C / 400\°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini enables to keep efficient braking while rainy. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get vapour lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 % of water. RECOMMENDATIONSAvoid mixing with polyglycols based brake fluid.Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).Store brake fluid in its original container, tightly closed to prevent moisture absorption.Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water. PROPERTIES100% synthetic fluid, polyglycol bases.Colour AmberDry boiling point 325°C / 617°FWet boiling point 204°C / 400°FViscosity at -40°C (-40°F) 1698 mm°/sViscosity at 100°C (212°F) 2.59 mm°/s

_oil_1561575151.jpg

MOTUL RBF 660 RACING DOT 4 BRAKE FLUID 500ML

Japan Formula Motor Vehicle Brake Oil Genuine Seiken BF3 Heavy Duty Brake Fluid

_oil_1612698342.jpg

SEIKEN DOT 3 BRAKE FLUID 500ML

Lubrex’s Stop is a completely synthetic brake oil based on polyalkylene glycol ethers and borate esters with a high boiling point. Stop is a very versatile brake oil, suitable for use in ABS systems as well as hydraulic clutch systems in cars, commercial vehicles, off-road vehicles, agricultural vehicles and motorcycles. Stop has an exceptionally high thermal stability as well as exceptional compatibility with seals and excellent thermal and viscous properties. Stop can also be used when mixed with other Dot-3 and Dot-4 brake oils.wet boiling point 280C