LIQUI MOLY MOTORBIKE ENGINE FLUSH SHOOTER 80ML

A small single-dose engine flush sized specifically for motorbike oil systems, dissolving sludge and varnish deposits before an oil change so they drain out with the old oil rather than settling into the new fill. It's also formulated to be safe on wet clutches, which matters since a flush that isn't clutch-safe can cause slipping after the oil change.

How to Use:

• Add the full 80ml can to the motor oil while the engine is at running temperature, before draining the oil
• Mixing ratio: 80ml : 800–2,000ml (0.8–2L) engine oil
• Let the engine idle for approximately 10 minutes
• On motorbikes with a manual clutch, pull the clutch lever in and hold for a few seconds, repeating this several times during the idle period
• Drain the oil and replace it with fresh oil and a new filter

Benefits:

• Helps prevent the clutch slip that can occur when switching to a different engine oil brand
• Dissolves sludge and lacquer deposits so they're removed at the next oil change rather than left behind
• Tested not to harm common sealing materials

Key Features:

• Sized for typical motorbike oil capacities
• Compatible with all commercially available motor oils
• Safe for use on motorbikes with wet clutches

Specifications:

• Brand: Liqui Moly
• Volume: 80ml
• Mixing ratio: 80ml : 800–2,000ml (0.8–2L) engine oil

Country Of Import: GERMANY

Country Of Origin: GERMANY

Appropriate Use: For Bike